PFS3117-16ET-135
16-Port FE PoE+ 1-Port Gigabit Combo PoE Switch
> Compliant IEEE 802.3, IEEE 802.3u, IEEE802.3ab, IEEE802.3x standards> Supports IEEE802.3af, IEEE802.3at, Hi-PoE standards
> Supports normal working mode, port isolation (VLAN) mode, monitoring mode, network extend mode.
> Supports Store-and-Forward
> 16*10/100Mbps ports, 1*Gigabit Combo port, support port auto flipping (Auto MDI / MDIX)
> Port 1-2 support the maximum power of 60W, PoE output total power up to 135W
> Supports IEEE802.3x flow control for Full-duplex Mode and backpressure for Half-duplex Mode
> 4K entry MAC address table with auto-learning and auto-aging
> LED indicators for monitoring power, link and activity
Technical Specification
Model: DH-PFS3117-16ET-135
- Standards:
IEEE802.3z,IEEE802.3x, IEEE802.3af, IEEE802.3at,
Hi-PoE
- Interface:
1 x Gigabit Combo (RJ45/SFP)
- Transfer Method: Store-and-Forward
- Switching Capacity: 5.2Gbps
- Packet Forwarding Rate: 3.87Mpps
- Packet Buffer: 2.75Mbit
- PoE Ports(RJ45):
- Port 1/2 : Hi-PoE/PoE+/PoE;
- Port 1-16 : PoE+/PoE
- Power Pin Assignment:
Other PoE port: 4/5 (+), 7/8 (-)
- PoE Budget: 135W
Isolation mode: PoE port cannot communicate with each other,
but can communicate with the uplink Combo port
- Mode:
- CCTV mode:
cache, switch all ports can communicate with each other
- Extender mode:
transmission distance of up to 250 meters, all ports
can communicate with each other
- Indicators
- Per Device: Power: Green MAX : Red
- Per Port: Link/Act: Green PoE: Yellow
- Power Supply: AC 100V~240V 50/60HZ
- Dimensions (W × D × H): 340*200*43 mm (13” metal case)
- Environment:
Operating Temperature: 0°C ~ 45°C
Storage Temperature: -40°C ~ 70°C
Operating Humidity: 10%~90% RH No condensation
Storage humidity: 5%~90% RH No condensation
Storage Temperature: -40°C ~ 70°C
Operating Humidity: 10%~90% RH No condensation
Storage humidity: 5%~90% RH No condensation